In construction of this box we used very popular and very well tested FTDI chip. It`s reliable and stable solution converting USB to Virtual COM port.

UniBox USB work with China standard cables used in such devices as: RedBox, FuriousBox, UniBlackBox, USPI box, Infinity, VygisToolbox and others. However You can use cables also from other boxes like UniBox 2.0, 3.0 or 4.0, Ultralogic and other, all You need is converter (check below this page)

Nokia Phones, enable Fbus or M/C-Bus mode - depending on your software.
Ericsson Phones, enable Fbus mode to operate.
Motorola T191 and T205 enable Fbus mode to operate.
Motorola V60/66/70, enable Fbus mode to operate.
Siemens Phones, enable Fbus mode to operate.
Alcatel Phones, enable Fbus mode to operate.
Panasonic Phones, enable Fbus mode to operate.
Sony Phones, enable Fbus mode to operate.
Philips Phones, enable Fbus mode to operate.
Bosch Phones, enable M/C-Bus mode to operate.
Sagem Phones, enable Fbus mode to operate.
Trium Phones, enable Fbus mode to operate.
Samsung Phones, enable FBus mode to operate.

No AC/DC power supply included, power supply taken from USB port!
Important! UniBox is set of cables, for some new models/versions of phones You may need additional software (which is not free).

1 = Switchable 5V Flash Supply
2 = TX (output, data to phone)
3 = RX (input, data from phone)
4 = RTS (output, data to phone)
5 = CTS (input, data from phone)
6 = M/C BUS (bi-directional 1 wire bus)
7 = GND
8 = GND

Advanced hardware working via USB port in 1.1 and 2.0 standard allows to transfer data up to 921000 kb/s (~1Mbit/s !)
 Work without any problems under all operatign systems as Win95/98/Me/2000/Xp
 Work with full speed 460800 kb/s at such phones as Alcatel, Mitsubishi, Siemens, LG, SonyEricsson
 Abbility to flash Siemens with cutted tracks using normal SWUP`s at full speed up to 1 Mbit/s!

Single chip USB <=> asynchronous serial data transfer
 Full handshaking & modem interface signals
 UART interface supports 7/8 data bits, 1/2 stop bits and Odd/Even/Mark/Space/No Parity
 Data transfer rate of 300 Baud => 1M Baud (RS232)
 384 Byte Rx buffer/128 Byte Tx buffer for high data throughput
 Adjustable Rx buffer timeout
 Fully assisted hardware or X-On/X-Off handshaking
 Built-in support for event characters and line break condition
 Support for USB suspend/resume through SLEEP# and RI# pins
 Integrated level converter on UART and control signals for interfacing to 5V and 3.3V logic
 Integrated 3.3V regulator for USB IO
 Integrated 6MHz - 48Mhz clock multiplier PLL
 USB Bulk or Isochronous data transfer modes
 4.35V to 5.25V single supply operation
 UHCI/OHCI/EHCI host controller compatible
 USB 1.1 and USB 2.0 compatible

Connect the box to your PC via USB A-B cable (in set) the Power LED will light up and You will see "UniBox" logo as soon as you have connected it. Install drivers and choose operating mode, connect the phone cable and the phone.

Package Contents:

UniBox USB:01pcs

Cables:110 pcs

1100,6260,6230,6800,3300,2600,6110,7650,Gage,3510,3300,8850

7610,3320,7210,9210,6600,3650,5510,9500,6260,6820,3220,2650,8910

7200,6230,6800,7600,5140,6650,3200,3210,5100B,1100,6100B,8310,ngage

6630,8210,PHL 630,Mot T191,Mot v66,PAN G50,Pan GD55,Sam A100,Maxon O2

Eri T28,PHL Fisco,PHL SaVVy,ALT OT320,PHL 350,SAM A200,ALT OT525,SIM S35

SIM 5XX,lgU8110,VK 207i,Pan X70,Toshiba TS21i,SIM S40LG 600,Sony J5,SAM S100

SIM C55,PAN GD90,PAN GD92,SAG 9XX,SIM C30,BOS 908,SAM 2200,LG 7050,ALT BE/DB

LG 3XX,PHL 530,PAN G500,Sony Z5,LG,ERI 768,LG 510, Nec N21,SAM C100,XDA na COM

SHP GX30,BOS 509,SHP GX10,SAM A300,PAN G60,SIM ST55,ERI 388,SAM S600,SAM E700

GAge,Mit M330Sag 835,Sim 4xx,LG B1200,MOT T205,MYC-2,ALT OT715,SAM A288,

ALT OT511,ALT OT535,Sendo S200,usb,COM,ALT OT531,Open tool,converter 8P8c-8p8c

USB A-B Cable